2 Blade Milano Chaffcutter (Without Motor)

The Milano 2-Blade Chaff Cutter is an agricultural machine designed for small to medium-scale livestock farming. It is engineered to process fibrous plant material into consistent, bite-sized pieces to improve livestock digestibility and reduce feed waste. Machine Details Cutting System: Features two hardened, high-carbon steel blades that rotate to chop material. Power Compatibility: Designed as a versatile frame; it can be powered by a 2–5 HP electric motor, petrol engine, or diesel engine depending on the farm’s requirements. Capacity: Typically processes 400 kg to 1,200 kg of fodder per hour, depending on the material and the power source used. Construction: Built with a heavy-duty steel frame to withstand the vibrations and demands of daily agricultural use. Applications: Primarily used for chopping Napier grass, maize stalks, sorghum, hay, and straw for cattle, goats, sheep, and pigs. It is also highly effective for silage production. Maintenance Guidelines Blade Sharpening: Regularly inspect the blades for dullness. Sharp blades are essential for clean cuts and preventing the machine from stalling. Lubrication: Monthly, remove and clean the bearings on the main shaft and feed roller shaft. Re-grease these points using a grease gun to ensure smooth rotation. Drive Belt Check: Periodically inspect the drive belts for tension and wear. Replace or tighten them if they appear loose or cracked to prevent power slippage. Cleaning: Clear the machine of all debris, dust, and residual forage after every use. If the machine will be inactive for a long period, cover it with a tarpaulin and store it in a dry, ventilated area to prevent rust. Nut & Bolt Inspection: Check all fastening bolts before operation, as vibrations can loosen them over time. Dos and Don’ts DO ensure the machine is placed on a flat, stable surface before starting. DO use a push-stick or the feeding hopper to introduce fodder; keep your hands well away from the input chute. DO wear protective gear, such as gloves and goggles, during operation. DON’T reach into the feed chute or touch moving parts while the machine is running, even if there is a jam. DON’T operate the machine without all original safety guards securely in place. DON’T ignore abnormal noises or vibrations; shut down the engine immediately to investigate. DON’T allow children or unauthorized personnel to operate or play near the machine. Common Questions & Answers Q: My chaff cutter is stalling/jamming. What should I do? A: First, turn off the power source immediately. Check if the feed intake is overloaded or if the material is too thick/tough. Clear the blockage carefully after the machine has fully stopped. Also, check if your blades have become dull, which increases the load on the motor. Q: How do I know if the blades are properly adjusted? A: The clearance between the moving blades and the fixed (counter) blade should generally be set between 0.5 mm and 1 mm. If the gap is too wide, it will shred or tear the fodder rather than cut it cleanly. Q: Can I use this machine to cut wood or other hard materials? A: No. This machine is specifically designed for agricultural fodder (grass, stalks, hay). Feeding hard materials like wood or metal will damage the blades and the internal gearbox, potentially causing dangerous shrapnel or total machine failure. Q: What engine/motor size do I need? A: For small family farms, a 2 HP motor is often sufficient. For medium-scale commercial use requiring higher throughput, a 4–5 HP motor or engine is recommended. BUT ALL MOTOR  ARE ALSO AVAILBLE AT OUR COMPANY.