Micro Cut & Finish P3.01 – High Gloss Hologram Remover Micro Cut & Finish P3.01 is a professional micro polishing compound designed for removing holograms, fine scratches and sanding marks up to P3000 grit. At the same time, it provides long-term sealing and exceptional gloss through the addition of carnauba wax. After heavy compounding, paint surfaces often show haze or micro-marring. Therefore, a precise finishing polish is essential. This formula refines paintwork quickly while creating a smooth and deep gloss surface, even on dark and sensitive colours. Fine Scratch & Hologram Removal With a cut level of 3.2 and gloss rating of 9.5, this finishing compound balances correction and shine perfectly. It effectively removes: Holograms Fine scratches Sanding marks up to P3000 Micro-marring from previous polishing steps Unlike products that simply fill defects, this polish eliminates imperfections mechanically. High Gloss Finish with Carnauba Protection Micro Cut & Finish P3.01 contains high-quality carnauba wax. As a result, it leaves a smooth and glossy surface with added protection. The finish remains brilliant under extreme lighting conditions. Additionally, the formula works exceptionally well on dark paint systems. Application & Machine Use For best results, use a Micro Cut Pad with an orbital polisher with forced rotation (e.g., Makita PO5000C at high speed). A rotary polisher can also be used. Before polishing, fully moisten new or dry pads with product. Apply evenly with the machine switched off, then polish crosswise with medium pressure. Finish with reduced pressure for maximum gloss. Remove residues using an ultrasonically cut microfibre cloth. Areas of Use Suitable for paintwork on: Cars Commercial vehicles Motorcycles Do not use on hot surfaces. Shake before use and test compatibility prior to application. For full technical details, refer to the Documents section.